Mitsubishi Evo X Performance and Tuning Packages

MITSUBISHI EVO X TUNING PACKAGES

Auto Torque have expertly put together Performance Packages based on the most proven and popular parts in the industry for your Mitsubishi Evolution.

We have over 15 years experience in tuning and building the Mitsubishi Evo engines. All our technicians are fully qualified specialists.

STAGE ONE - AT330+

The Auto Torque stage one is the first stage in unlocking the Evo X’s true potential. We replace the OEM boost solenoid to a more controllable 3 port boost solenoid, allowing us to fine tune the boost during the mapping session.

Finally we will replace the original air filter with a HKS panel filter, allowing more air flow through the air box and in to the engine.

Every Auto Torque remap is carried out on a 4 wheel drive dyno, allowing us to safely and accurately carry out the tune. The Evo engine is controlled electronically by the ECU, which is constantly processing information received from all the sensors. The engines fuelling, ignition, timing, boost, torque values etc are all calibrated within the ECU. By reading this information and knowing the modifications the car has, we can edit the relevant tables in the map to keep the engine running at optimal performance.

Stage 1 Package £927 ex VAT

STAGE TWO - AT365 + (SST) AT400 (manual)

The Stage 2 package is our most popular tune for the Evo X. As a stage one, but replacing the panel filters with an induction kit and full 3” exhaust system, releasing the MIVEC 4B11T engine’s full potential. The increased intake suction noise and amplified exhaust note results in the Evo sounding like the true performance machine it is.

 

Price below is quoted with a Miltek full 3″ system, other options available

Stage 2 Package £2,347 ex VAT

Pre-Dyno Check

A Pre-Dyno check is performed on all vehicles prior to a dyno session. Failure to do so can cause less than optimum results and disrupt your session. Maintenance will not be performed on your vehicle while it is strapped on the dyno during your rental session. If service is necessary during a tuning session, it will be charged at the tuning labour rate and will result in additional strap down fees. Pre-Dyno consists of checking spark plug gap, cylinder compression check, fuel pump relay (EVO X £19), road test, full cylinder and intake system smoke check.

  • Please bring enough fuel for your dyno appointment. If you are having your car tuned, please ensure the fuel tank is FULL, and contains the same grade (octane) fuel you intend to use in the vehicle. We do not carry fuel on-site! If you have special fuel requirements, please let us know ahead of time so we can accommodate them.
  • If you already have some of the parts fitted, we can custom build you a specific stage modification to suit your needs.
  • If you are aiming for over 400 BHP we recommend you have the engine forged, we carry out and drop in deal from £1799 +vat

Checkout our Mitsubishi Evo Performance Parts

For builds over 400 BHP we offer various turbo choices please call or email for more information.