Nissan GT-R Performance and Tuning Packages
PERFORMANCE AND TUNING PACKAGES
Although the Nissan GT-R is a very impressive car in standard form, with its 3.8 V6 twin turbo changed engine; not many of these actually stay standard for very long. At Auto Torque, we are proud to offer a range of performance upgrades for the Nissan GT-R; which we have developed since the GTR was released into the UK market.
Below are our power upgrade packages, which shows what modifications are carried out and the resulting power output. We can offer a bespoke service, which can be tailored to meet your personal requirements. If you would like to discuss any modifications in further detail, please feel free to contact us with any questions you have.
AT STAGE 1 / 590 BHP
The AT Stage 1 upgrade comprises of the Auto Torque hand built stainless steel Y-Pipe and a custom EcuTtek ECU recalibration. As well as enhancing the exhaust note, it will significantly improve the GT-R’s already impressive performance.
- Auto Torque 90mm Stainless Steel Y-Pipe (lifetime warranty)
- EcuTek Licenced Rolling road remap (license may be required)
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Full Vehicle Safety Check & Report
- Launch Control Map Included with Gearbox software upgrade *
- BHP increase to approximately 590
Stage 1 Package £940 ex VAT
AT STAGE 2 / 610 BHP
The AT Stage 2 replaces the existing Y-Pipe back system with Auto Torque’s custom stainless steel version. This not only gives a higher flowing exhaust system but brings the GT-R sound to life. To complement the new exhaust system, we replace the existing air filters will high flowing K&N panel filters to ensure sufficient air induction. We offer a lifetime warranty on all Auto Torque custom fabricated exhaust parts giving you complete peace of mind.
- Replacement K&N Drop in Panel Air Filters
- Auto Torque Stainless Steel Y-Pipe (lifetime warranty)
- Auto Torque Stainless Steel Rear back Exhaust System (lifetime warranty)
- EcuTek Licenced Rolling road remap (license may be required)
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Launch Control Map Included
- Full Vehicle Safety Check & Report
- Launch Control Map Included with Gearbox software upgrade*
- BHP increase to approximately 610
Stage 2 Package £1935 ex VAT
AT STAGE 3 / 615 BHP
The AT stage 3 replaces the K&N Air Filters for the larger Auto Torque intake kit with 80mm diameter pipework and large cone filters, which ensures sufficient air into the engine.
- Auto Torque Intake Kit
- Auto Torque Stainless Steel Y-Pipe (lifetime warranty)
- Auto Torque Stainless Steel Rear Exhaust System (lifetime warranty)
- EcuTek Licenced Rolling road remap (license may be required)
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Full Vehicle Safety Check & Report
- Launch Control Map Included with Gearbox software upgrade*
- BHP increase to approximately 600
This price is based on using the 90mm Auto Torque exhaust system.
Other options available (Price on application) :
- Akrapovic / Milltek / Boost Logic exhaust systems
- Auto Torque 102mm hand-built Stainless, Titanium and Inconel systems.
Stage 3 Package £2,250 ex VAT
AT STAGE 4 / 640 BHP
At this level of power, the standard fuel injectors will be running at 100% duty, therefore it is time to increase the capacity from the 570cc OEM to Asnu Motorsport 1050cc to deliver the correct amount of fuel at the rate it demands.
- Auto Torque Intake Kit
- Auto Torque Stainless Steel Y-Pipe (lifetime warranty)
- Auto Torque Stainless Steel Rear Exhaust System (lifetime warranty)
- Asnu 1050cc Motorsport Injectors
- EcuTek Licenced Rolling road remap (license may be required)
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Full Vehicle Safety Check & Report
- Launch Control Map Included with Gearbox software upgrade*
- BHP increase to approximately 640
Stage 4 Package £2,900 ex VAT
AT STAGE 4.25 / 660 BHP
The AT Stage 4.25, is our most popular GTR upgrade package, due to the performance level obtained versus investment made. The AT Stage 4.25 is the optimum package using the GT-R’s original turbo’s before we recommend forging the engine, keeping it cost effective and reliable. At this stage, we remove the primary cat’s, replacing them with the Auto Torque handmade 3” decat downpipes. The AT Stage 4.25 will see BHP increase to approximately 650 BHP +/- 5%.
- Auto Torque Intake Kit
- Auto Torque Stainless Steel Y-Pipe (lifetime warranty)
- Auto Torque Stainless Steel Rear Exhaust System (lifetime warranty)
- Auto Torque Stainless Steel Downpipes (lifetime warranty)
- Asnu 1050cc Motorsport Injectors
- EcuTek Licenced Rolling road remap (license may be required)
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Full Vehicle Safety Check & Report
- Launch Control Map Included with Gearbox software upgrade*
With out CAT back exhaust – Stage 4.25 Package £2,905 ex VAT
Stage 4.25 Package £3,795 ex VAT with CAT back Milltek Exhaust system
AT STAGE 4.5 / 700+ BHP
The AT stage 4.5 replaces the OEM turbochargers with the Auto Torque hybrid version, allowing more BHP across the entire rev range, all the way to the red line. This package can be carried out on a standard GT-R engine, but the torque will be limited to safe proof the bottom end.
- AT 700+ BHP Hybrid Turbos with Turbo Smart Actuators
- High pressure motorsport fuel pumps
- Auto Torque Turbo Down Pipes
- Asnu Twin Motorsport Fuel Pumps
- 1050cc Asnu Motorsport Injectors
- Auto Torque 80mm MAF Intake Pipes with MAF Housings
- AT Race Intercooler
- Hi-Flow K&N Air Filters
- Auto Torque Stainless Steel Y-Pipe
- Auto Torque Stainless Steel Rear Exhaust System
- EcuTek Licenced Rolling road remap (license may be required)
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Engine Removal & Refit
- Launch Control Map Included with Gearbox software upgrade*
- Change of Engine Oil & Filter
- A/C Re-Gas
- Coolant Change
- Full Vehicle Safety Check & Report
Stage 4.5 Package From £10,250 ex VAT
AT Stage 5 / BHP 780+
The AT stage 5 uses the Auto Torque hybrid turbo’s and a race intercooler kit allowing the increased air from the turbo’s to be cooled at a more efficient rate. This in turn produces an impressive performance increase and drivability whilst maintaining the fast turbo spool up.
If this package is combined with a forged engine build and race intercooler these turbo’s will see a power figure in the region of 850BHP.
Below graph is showing 780 BHP and a capped torque value of 630nm as it is running a stock engine.
Forging the engine is recommended on 700+ BHP cars
- AT 780+ BHP Hybrid Turbos with Turbo Smart Actuators
- High pressure motorsport fuel pumps
- Auto Torque Turbo Down Pipes
- Asnu Twin Motorsport Fuel Pumps
- 1050cc Asnu Motorsport Injectors
- Auto Torque 80mm MAF Intake Pipes with MAF Housings
- AT Race Intercooler
- Hi-Flow K&N Air Filters
- Auto Torque Stainless Steel Y-Pipe
- Auto Torque Stainless Steel Rear Exhaust System
- EcuTek Licenced Rolling road remap
- Boost Control maps at your fingertips
- Custom Ignition and Fuel Maps
- Increase in Power, Torque and Fuel Economy
- Auto Torque RACEROM Switchable maps – Economy / Race
- Engine Removal & Refit
- Launch Control Map Included with Gearbox software upgrade*
- Change of Engine Oil & Filter
- A/C Re-Gas
- Coolant Change
- Full Vehicle Safety Check & Report
*Gearbox upgrade charged as a separate licence
Stage 5 Package From £10,995 ex VAT